Samsung iES4024GP, Management Manual

Page: 122 / 712

Configuring the Switch
3-66
3
• Accounting for users that access management interfaces on the switch through the
console and Telnet.
• Accounting for commands that users enter at specific CLI privilege levels.
• Authorization of users that access management interfaces on the switch through
the console and Telnet.
To configure AAA on the switch, you need to follow this general process:
1. Configure RADIUS and server access parameters. See “Configuring
Local/Remote Logon Authentication” on page 3-59.
2. Define RADIUS and server groups to support the accounting and
authorization of services.
3. Define a method name for each service to which you want to apply accounting or
authorization and specify the RADIUS or server groups to use.
4. Apply the method names to port or line interfaces.
Note: This guide assumes that RADIUS and servers have already been
configured to support AAA. The configuration of RADIUS and server
software is beyond the scope of this guide, refer to the documentation provided
with the RADIUS or server software.
Configuring AAA RADIUS Group Settings
The AAA RADIUS Group Settings screen defines the configured RADIUS servers to
use for accounting and authorization.
Command Attributes
• Group Name - Defines a name for the RADIUS server group. (1-255 characters)
• Server Index - Specifies the RADIUS server and sequence to use for the group.
(Range: 1-5)
When specifying the index for a RADIUS sever, the server index must already be
defined (see “Configuring Local/Remote Logon Authentication” on page 3-59).
Web – Click Security, AAA, Radius Group Settings. Enter the RADIUS group name,
followed by the number of the server, then click Add.
Figure 3-35 AAA Radius Group Settings