Configuring the Switch
3-258
3
Web
– Click IGMP Snooping, Static Multicast Router Port Configuration. Specify the
interfaces attached to a multicast router, indicate the VLAN which will forward all the
corresponding multicast traffic, and then click Add. After you have finished adding
interfaces to the list, click Apply.
Figure 3-146 Static Multicast Router Port Configuration
CLI
– This example configures port 1 as a multicast router port within VLAN 1.
Displaying Port Members of Multicast Services
You can display the port members associated with a specified VLAN and multicast
service.
Command Attributes
•
VLAN ID
– Selects the VLAN for which to display port members. (Range: 1-4094)
•
Multicast IP
Address
– The IP address for a specific multicast service.
•
Multicast Group Port List
– Shows the interfaces that have already been
assigned to the selected VLAN to propagate a specific multicast service.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/1
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/1 Static
Console#
Summary of Contents for iES4024GP
