Samsung iDCS100, System Administration Manual

Page: 25 / 42

Samsung i DCS100 System Administration Guide
21
Open customer programming and follow these instructions.
ACTION DISPLAY
1. Press Transfer (or TRSF ) 105
Display shows
2. Dial the station number (e.g.,
205 ) OR
press the VOLUME keys to select the station
and press the right soft key to move the
cursor
If the selected station has no speed dial
bins, this display will be shown and a
new station may be selected
3. Dial the speed dial number (e.g., 05) OR
press the VOLUME keys to select location and
press the right soft key to move the
cursor OR press the left soft key to return
to step 2
4. Enter the trunk access code (e.g., 9)
followed by the number to be dialled
(e.g., 4264100)
(If you make an error, press
HOLD to
clear an entry or use the VOLUME DOWN key
to step back)
5. Press the
F key to access Program Personal
Speed Dial Names For Stations [MMC106,
step 4, below]
to enter a name for this number
OR press left soft key to return to step 3
OR press right soft key to return to step 2
OR press
Transfer (or TRSF ) to save and exit
programming
OR press
SPEAKER to save
and advance to the next program
•
PROGRAM PERSONAL SPEED DIAL NAMES
FOR STATIONS
[MMC 106]
Individual station users can program their own speed dial names, but in cases where
this is not practical or not straightforward (e.g. for single line telephones), this program
allows a system administrator to view or change any station’s speed dial names. The
station speed dial codes are 00–49. Each station can have up to 10 names (00–09) by
default and can be assigned more in blocks of 10, up to a maximum of 50 names.
Open customer programming and follow these instructions.
[201] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05 : _
[205] SPEED DIAL
05 : 9-4264100_