Samsung
i
DCS100
System Administration Guide
10
SYSTEM ADMINISTRATOR
PROGRAMMING
Before any customer programs can be accessed, you must first open programming us-
ing the customer-level passcode you have been assigned. This, and all subsequent
programming, must be done using a display keyset.
Note: Should it become necessary to change the customer-level passcode, see MMC 201.
PROGRAM KEYS
The following keys are used for programming.
VOLUME UP (
+
or
V
)
Scroll forward through options.
VOLUME DOWN (
–
or
W
)
Scroll backward through options.
KEYPAD (0–9,
4
and #)
Enter selections in display.
SOFT KEYS
Move cursor left and right.
SPEAKER
Store data and advance to next program.
TRANSFER (TRSF)
Store data and exit
HOLD
Clear entry in display
OPEN CUSTOMER-LEVEL PROGRAMMING
[MMC 200]
Opens customer-level programming mode to provide access to system administrator
programming.
ACTION
DISPLAY
1.
Press
Transfer
(or
TRSF
)
and dial
200
ENABLE CUS. PROG.
PASSCODE: _
2.
Dial the 4-digit passcode.
(The passcode is not displayed)
ENABLE CUS. PROG.
DISABLE
3.
Dial
1
to select ‘ENABLE’
OR
ENABLE CUS. PROG.
ENABLE
Press
VOLUME
up or down
key to select
4.
Press the
SPEAKER
key.
201: CUS. PASSCODE
SELECT PROG ID
5.
Dial the 3-digit program (MMC) code you want to
access (e.g. 201)
OR
Scroll through MMC codes using the
VOLUME
keys
and press the
SPEAKER
key to select.
Follow the instructions for your selected program. Some programs are described in this
section. For other programs, refer to the
Samsung Combined Programming Manual.
