background image

Scroll to 

STATION ON/OFF

and press 

ENTER

OR

—you may dial 0 and

immediately enter the option.

Scroll to 

HOT KEYPAD

, press 

ENTER

to change option status.

Press 

CANCEL

to enter change and return to Main Configuration Menu—

OR

—press 

END

to return to idle screen.

KEY CONFIRMATION TONE

You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.

While on-hook, press 

TRANSFER

and then dial 

110

.

Dial 

040

to turn tones off or 

041

to turn tones on.

Press 

TRANSFER

to store your selection.

REJOINING A PAGE

This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:

With the handset on-hook, press 

TRANSFER

and then dial 

110

.

Dial 

051

to turn this feature on or 

050

to turn it off.

Press 

TRANSFER

to store your selection.

From the LCD:

Press 

MENU

button.

Scroll to 

CONFIGURATION OPTION

and press 

ENTER

.

Scroll to 

STATION ON/OFF

and press 

ENTER

OR

—you may dial 

0

and

immediately enter the option.

Scroll to 

PAGE REJOIN

, press 

ENTER

to change option status.

Press 

CANCEL

to enter change and return to the Main Configuration Menu—

OR

—press 

END

to return to idle screen.

RING PREFERENCE

This feature automatically answers ringing calls when you lift the handset or press
the

ANS/RLS

button.This method will always answer calls in the order they arrived

at your keyset. When you turn ring preference off, you must press the flashing but-
ton to answer a call, allowing you to answer calls in the order you choose.

With the handset on-hook, press 

TRANSFER

and then dial 

110

.

Dial 

061

to turn ring preference on or 

060

to turn it off.

Press 

TRANSFER

to store your selection.

53

5012L.qxp  3/10/2005  10:48 AM  Page 59

From the LCD:

Press 

MENU

button.

Scroll to 

CONFIGURATION

option, press 

ENTER

.

Scroll to 

STATION ON/OFF

and press 

ENTER

OR

—you may dial 

0

and imme-

diately enter the option.

Scroll to 

RING PREF

, press 

ENTER

to change option status.

Press 

CANCEL

to enter change and return to Main Configuration Menu—

OR

—press 

END

to return to idle screen.

AUTO ANSWER CO CALLS

This option will allow CO calls that directly ring your phone to auto answer. When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer 

(see Set Answer Mode)

.

Press 

MENU

button.

Scroll to 

CONFIGURATION

option, press 

ENTER

.

Scroll to 

STATION ON/OFF

and press 

ENTER

OR

—you may dial 

0

and imme-

diately enter the option.

Scroll to 

AUTO ANS CO CALL

, press 

ENTER

to change option status.

Press 

CANCEL

to enter change and return to Main Configuration Menu—

OR

—press 

END

to return to idle screen.

NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer the
call.

DISPLAY SPEED DIAL NAME

This option allows you to view the name associated with a speed dial number as
it is dialed.

With you handset on-hook, press 

TRANSFER

and then dial 

110

.

Press 

111

to turn 

DISP SPDNAME

on or 

110

to turn it off.

Press 

TRANSFER

to store your selection.

From the LCD:

Press 

MENU

button.

Scroll to 

CONFIGURATION

option, press 

ENTER

.

Scroll to 

STATION ON/OFF

and press 

ENTER

OR

—you may dial 

0

and imme-

diately enter the option.

Scroll to 

DISP SPDNAME

, press 

ENTER

to change option status.

54

5012L.qxp  3/10/2005  10:48 AM  Page 60

Summary of Contents for iDCS 500 Release 2/OfficeServ



















































Reviews: