background image

ENG - ii

ENG - iii

Safety INformatIoN

However, if there is no alternative to cutting off the 
plug, remove the fuse and then safely dispose of 
the plug. Do not connect the plug to a mains 
socket as there is a risk of shock hazard from the 

bared flexible cord. Never attempt to insert bare 

wires directly into a mains socket. A plug and fuse 
must be used at all times.

ImPortaNt

The wires in the mains lead are coloured in 
accordance with the following code:– BLUE = 
NEUTRAL BROWN = LIVE As these colours may not 
correspond to the coloured markings identifying 
the terminals in your plug, proceed as follows:– The 
wire coloured BLUE must be connected to the 
terminal marked with the letter N or coloured 
BLUE or BLACK. The wire coloured BROWN must 
be connected to the terminal marked with the 
letter L or coloured BROWN or RED.

WarNING : Do Not CoNNeCt eItHer WIre to 
tHe eartH termINaL WHICH IS marKeD WItH 
tHe Letter e or By tHe eartH SymBoL 

or CoLoUreD GreeN or GreeN aND yeLLoW.

PreCaUtIoNS

1. 

Ensure that the AC power supply in your 
house complies with the power 

requirements listed on the identification 

sticker located on the bottom of your 
product. Install your product horizontally, on 
a suitable base (furniture), with enough 
space around it for ventilation (7~10 cm). 
Make sure the ventilation slots are not 

covered. Do not place the unit on amplifiers 

or other equipment which may become hot. 
This unit is designed for continuous use. To 
fully turn off the unit, disconnect the AC plug 
from the wall outlet. Unplug the unit if you 
intend to leave it unused for a long period of 
time.

Safety WarNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE THE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS ARE INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

CaUtIoN

rISK of eLeCtrIC SHoCK. 

Do Not oPeN.

This symbol indicates that high voltage 
is present inside. It is dangerous to 
make any kind of contact with any 
internal part of this product.

This symbol indicates that this product 
has included important literature 
concerning operation and maintenance.

Class II product : This symbol indicates 
that it does not require a safety 
connection to electrical earth (ground).

AC voltage : This symbol indicates that 
the rated voltage marked with the 
symbol is AC voltage.

DC voltage : This symbol indicates that 
the rated voltage marked with the 
symbol is DC voltage.

Caution, Consult instructions for use : 
This symbol instructs the user to 
consult the user manual for further 
safety related information.

WarNING 

 

• To reduce the risk of fire or electric shock, do 

not expose this appliance to rain or moisture.

CaUtIoN

 

TO PREVENT ELECTRIC SHOCK, MATCH WIDE 
BLADE OF PLUG TO WIDE SLOT, FULLY 
INSERT.

 

This apparatus shall always be connected to a 
AC outlet with a protective grounding 
connection.

 

To disconnect the apparatus from the mains, 
the plug must be pulled out from the mains 
socket, therefore the mains plug shall be 
readily operable.

 

• Do not expose this apparatus to dripping or 

splashing. Do not put objects filled with 

liquids, such as vases on the apparatus. 

 

To turn this apparatus off completely, you 
must pull the power plug out of the wall 
socket. Consequently, the power plug must 
be easily and readily accessible at all times.

Wiring the main Power Supply 

Plug (UK only)

ImPortaNt NotICe

The mains lead on this equipment is supplied with 
a moulded plug incorporating a fuse. The value of 
the fuse is indicated on the pin face of the plug 
and if it requires replacing, a fuse approved to 
BS1362 of the same rating must be used.  
Never use the plug with the fuse cover removed. 
If the cover is detachable and a replacement is 
required, it must be of the same colour as the fuse 

fitted in the plug. Replacement covers are 
available from your dealer. If the fitted plug is not 

suitable for the power points in your house or the 
cable is not long enough to reach a power point, 
you should obtain a suitable safety approved 

extension lead or consult your dealer for assistance.

 

Summary of Contents for HW-N400





























Reviews: