Samsung HW-N400, User Manual

Page: 13 / 28

ENG - 8 ENG - 9
If the device fails to connect
• If the previously connected Soundbar listing (e.g. “ [aV] Samsung Soundbar Nxxx N-Series ”)
appears in the list, delete it.
• Press the PaIr button on the remote control or in “ Bt ” mode, press and hold the (Source)
button for more than 5 seconds on the right side of the Soundbar to switch to “ Bt PaIrING ” mode.
Then, select “ [aV] Samsung Soundbar Nxxx N-Series ” from the TV’s search list.
What is the difference between Bt reaDy and Bt PaIrING?
• Bt reaDy : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Soundbar.
• Bt PaIrING : In this mode, you can connect a new device to the Soundbar. (Press the PaIr button
on the remote control or press and hold the (Source) button for more than 5 seconds on the
right side of the Soundbar while in “ Bt ” mode.)
NoteS
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
• The Soundbar automatically turns off after 5 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the tV
Press the (Source) button on the right side panel or on the remote control and switch to any mode
but “ Bt ”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the
p
(Play/Pause) button on the remote control for 5 seconds in “ Bt reaDy ” status. (Toggle On → Off)
05 CoNNeCtING aN eXterNaL DeVICe
Connect to an external device via a wired or wireless network to play the external device’s sound
through the Soundbar.
Connecting using an HDmI Cable
HDMI OUT
(TV-ARC)
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI IN
(ARC)
HDMI OUT
HDmI Cable
(not supplied)
HDmI Cable (not supplied)
Bottom of the Soundbar
HDmI
external Device
right Side of the Soundbar
1. Connect an HDMI cable (not supplied) from the HDmI oUt (tV-arC) jack on the back of the
product to the HDMI IN jack on your TV.
2. Connect an HDMI cable (not supplied) from the HDmI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
3. Press the (Source) button on the right side panel or on the remote control, and then select
“ HDmI” .
4. “ HDmI” mode is displayed on the Soundbar display panel and sound plays.