Samsung HW-M450, User Manual

Page: 26 / 64

ENG - 20 ENG - 21
6. Use the two Screws (M4 x L12) to attach both
Bracket-Wall Mount L and r to the
Soundbar’s bottom.
For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
• When assembling, make sure the hanger
part of the
Bracket-Wall Mounts are
located behind the rear of the Soundbar.
rear of Soundbar
right end of Soundbar
• The left and right mounts are different
shapes. Make sure to position them
correctly.
Wall Mount r Wall Mount L
7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
• Slightly tilt the Soundbar to insert both
Holder-Screw heads into Bracket-Wall
Mount holes. Push the Soundbar in the
direction of the arrow to make sure both sides
are firmly fixed.
Detaching the Soundbar from
the Wall
1. To separate the Soundbar from the wall
mount, push it in the direction of arrow, tilt it
up slightly, and then pull it away from the
wall as shown.
• Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
• When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
• For the optimal performance of a wall mount
installation, install the speaker system at
least 2 inches (5 cm) below the TV, if the TV is
mounted on the wall.
• For your safety, if you do not mount the unit
on the wall, install it on a secure, flat surface
where it is unlikely to fall.