Samsung HW-M450, User Manual

Page: 16 / 64

ENG - 10 ENG - 11
What are the Bt reaDy and Bt PaIrInG statuses?
• Bt reaDy : In this mode, you can search for previously connected TVs or connect to the Soundbar
from a previously connected mobile device.
• Bt PaIrInG : In this mode, you can connect to a new device. (While in “ Bt ” mode, press and hold the
(Source) button for more than 5 seconds on the right side of the Soundbar or on the remote
control.)
noteS
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft.
• The Soundbar automatically turns off after 5 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the tV
Press the (Source) button on the right side panel or on the remote control and switch to any mode
but “ Bt ”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
05 ConneCtInG an eXternaL DeVICe
Connect to an external device via a wired or wireless network to play the external device’s sound
through the Soundbar.
Connecting using an optical or analog audio (aUX) Cable
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
OPTICAL OUT
- AUDIO -
R L
optical Cable
audio (aUX) Cable
(not supplied)
Bottom of the Soundbar
BD / DVD player / Set-top box /
Game console
right Side of the Soundbar
1 optical Cable
X
Connect DIGItaL aUDIo In (oPtICaL) on the main unit to the OPTICAL OUT jack of the Source
Device using a digital optical cable.
Y Select “ D.In ” mode by pressing the (Source) button on the right side panel or on the remote
control.
2 audio (aUX) Cable
X Connect aUX In (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an
audio cable.
Y Select “ aUX ” mode by pressing (Source) button on the right side panel or on the remote
control.