Samsung HW-M450, User Manual

Page: 10 / 64

ENG - 4 ENG - 5
03 ConneCtInG tHe SoUnDBar
Connecting electrical Power
Use the power components (
1
,
2
,
3
) to connect the units to electrical outlets in the following order:
1.) Subwoofer

2.) Soundbar Main Unit. See the illustrations below.
• For more information about the required electrical power and power consumption, refer to the
label attached to the product. (Label : Bottom of the Soundbar Main Unit)
POWER
rear of Subwoofer
1
Power Cord
Connecting
electrical Power
HDMI OUT
(TV-ARC)
DC 24V DC 24V
HDMI IN
DC 24V
Bottom of the
Soundbar Main Unit
2
aC/DC adapter
3
Power Cord
Connecting
electrical Power
• Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so
that it is hanging with the AC cord input facing upwards, water or other foreign substances could
enter the Adapter and cause the Adapter to malfunction.
Connecting the Soundbar to the Subwoofer
When the subwoofer is connected, you can enjoy rich bass sound.
automatic connection between the subwoofer and the Soundbar
When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the
subwoofer is automatically connected to the Soundbar.
• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
LeD Indicator Lights on the rear of Subwoofer
LeD Status Description resolution
Blue
On
Successfully connected
(normal operation)
-
Blinking Recovering the connection
Check if the power cable to the main
Soundbar unit is connected properly or
wait for a while. (If blinking persists, try
manually connecting the subwoofer.
See page 6.)
Red On
Standby (with the Soundbar
main unit turned off)
Check if the power cable to the main
Soundbar unit is connected properly.
Connection failed
Connect again. See the instructions for
manual connection on page 6.
Red and
blue
Blinking Malfunction
See the contact information for the
Samsung Service Center in the manual.