Samsung HT-TX715K, User Manual

Page: 27 / 36

52
system setup
53
ENG
●
SYSTEM SETUP
SETTING THE TEST TONE
Use the Test Tone feature to check the speaker connections.
In Stop mode, press the MENU button.
Press the Cursor
▼
button to move to Audio and then press the
ENTER or
►
button.
Press the Cursor
▼
button to move to TEST TONE and then press
the ENTER or
►
button.
The test tone will be sent to L
Œ
C
Œ
R
Œ
SR
Œ
SL
Œ
SW in
order.
If the
ENTER button is pressed again at this time, the test tone
will stop.
d
Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE AUDIO
You can adjust the balance and level for each speaker.
In Stop mode, press the MENU button.
Press the Cursor
▼
button to move to Audio and then press the
ENTER or
►
button.
Press the Cursor
▼
button to move to SOUND EDIT and then
press the ENTER or
►
button.
Press the Cursor
▲
,
▼
button to select and adjust the desired
item.
Press the Cursor
◄
,
►
button to adjust the settings.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
2.
3.
•
•
1.
2.
3.
4.
MOVE ENTER EXIT RETURN
STOP
EXIT
MOVE ENTER EXIT RETURN
MOVE CHANGE EXIT
RETURN
Press the SOUND EDIT button and then press the Cursor
◄
,
►
button.
Each time you press the SOUND EDIT button, you can see
the balance and level for each speaker.
Adjusting Front/Rear Speaker Balance
You can select between 0 dB, -6 dB, and OFF.
The volume decreases as you move closer to – 6 dB.
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in s from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SETTING THE DRC (DYNAMIC RANGE COMPRESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
In Stop mode, press the MENU button.
Press the Cursor
▼
button to move to Audio and then press the
ENTER or
►
button.
Press the Cursor
▼
button to move to DRC and then press the
ENTER or
►
button.
Press the Cursor
▲
,
▼
to adjust the DRC .
When the Cursor
▲
button is pressed, the effect is greater, and
when the Cursor
▼
button is pressed, the effect is smaller.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
•




1.
2.
3.
4.
•
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
RETURN MOVE ENTER EXIT
CHANGE EXIT
RETURN
HT-X715K_NO EUR_ENG.indd 52-53 HT-X715K_NO EUR_ENG.indd 52-53 2008-7-14 13:00:20 2008-7-14 13:00:20