Samsung HT-TX715K, User Manual

Page: 14 / 36

26
connections
27
ENG
●
CONNECTIONS
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.
Be sure to match connector colors.
Press the AUX button on the remote control to select AUX 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL IN AUX 1 AUX 2 USB BT AUDIO TUNER .
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital
component.
Press the AUX button on the remote control to select DIGITAL IN .
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL IN AUX 1 AUX 2 USB BT AUDIO TUNER .
1.
•
2.
•
M

1.
2.
•
Optical Cable
(not supplied)
AUX2 : Rear Panel OPTICAL : Rear Panel
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
External Analog
Component
External Digital
Component
CONNECTING THE FM ANTENNA
Connect the FM antenna supplied to the FM 75
Ω
COAXIAL Jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it
to a wall or other rigid surface.
This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fi re may result.)
CONNECTING MICROPHONE
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen
against the accompaniment.
Connect the microphone to the MIC jack on the front panel.
You can connect up to two microphones.
Press the MIC VOL button to adjust the voice volume of the
microphone.
Press the ECHO button to adjust the echo level of the
microphone.
If you hear strange noises (squealing or howling) while using
the Karaoke feature, move the microphone away from the
speakers. Turning down the microphone volume or the speaker
volume is also effective.
When HDMI Audio is on, Mic is not available.
1.
2.
M

•
•
1.

2.
3.
M


FM Antenna (supplied)
HT-X715K_NO EUR_ENG.indd 26-27 HT-X715K_NO EUR_ENG.indd 26-27 2008-7-14 12:59:24 2008-7-14 12:59:24