GB
METHOD 2
Scart ...............
Better Quality
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
METHOD 1
Composite Video ...............
Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 3
Component (Progressive Scan) Video ...............
Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
•
When the Progressive scan mode is selected, the VIDEO output (Yellow) and
SCART output does not output any signal.
Note
CONNECTIONS
16
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to TV
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
•
"
COMPOSITE
" or "
RGB
" will appear in the display.
At this time, press the
VIDEO SEL.
button shortly to select between "
COMPOSITE
" and "
RGB
".
•
If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
•
If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.
METHOD 1
METHOD 3
METHOD 2
er
HT-Q20(1~40P) GB 3/1/06 2:41 PM Page 19
Summary of Contents for HT-Q20
Page 77: ......
Page 78: ......
Page 79: ...Memo ...
Page 80: ...AH68 01850B REV 01 THIS APPLIANCE IS MANUFACTURED BY ...