21
-
English
Settings
✎
To delete all Preset FM stations at once, press the
TITLE MENU
button for about 5 seconds in FM
Manual mode until
DEFAULT PRESET
appears
on the display.
Recording FM Radio
You can record your favorite radio broadcast on a
USB storage device.
1.
Insert a USB device into the USB jack on the
front of the product.
2.
Press the
FUNCTION
button to select
FM
, and
then press the
TUNING UP
,
DOWN
button to
select the station you want to record.
3.
Press the
RED (A)
button to start recording. The
recording process begins.
~
The recorded time is displayed on the left and
the recording time still available, based on
the amount of free space in the USB storage
device, is displayed on the right.
4.
Press the
EXIT
button to finish your recording.
The recording is stopped and saved as an .mp3
file at the same time. To play the recorded file,
refer to "Playing Files on a USB Device".
✎
The recorded file is saved in the
Tuner
folder which
is created automatically.
✎
Only the
HIGH
-END V
ACUUM TUBE SOUN
D
5V 0.5A
(OPEN/CLOSE),
HIGH
-END V
ACUUM TUBE SOUN
D
5V 0.5A
(POWER),
EXIT
,
MUTE
, and
/
-
, buttons are operable
while FM radio is being recorded.
✎
If you don't press any buttons while recording, the
screen saver will be enabled.
✎
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
✎
The radio is recorded at a set, default volume
even if you change the volume or press the
MUTE
button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the portion of the
file which has already been recorded may not play
back.
✎
Recording will not start if the remaining free space
in the USB storage device is less than 2MB.
✎
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message is
displayed and the recording stops.
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
To begin configuring your network connection, follow
these steps:
1.
In the Home screen, select
Settings
, and then
press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
Network Settings
, and then press the
v
button.
4.
Go to the instructions for Wired networks starting
below or the instructions for Wireless networks.
(See page 22)
Wired Network
Ğ
Ğ
Wired – Automatic
After following Steps 1 to 3 above:
1.
In the
Network Settings
screen, change
Network Type
to
Wired
. Then, select
Connect
and press the
v
button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
2.
When it is done, highlight
OK
, and then press
v
button.
Ğ
Ğ
Wired - Manual
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
After following Steps 1 to 3 above:
1.
In the
Network Settings
screen, change
Network Type
to
Wired
. Then, select
Connect
and press the
v
button.
The product searches for a network, and then
displays the connection failed message.
✎
If it is possible to connect the home theater to
your network wirelessly, select
Change Network
at this point, change the
Network Type
to
Wireless
, and then go to the instructions for
wireless networks. (See page 22)
02831P-HT-J5500K_J5530K_J5550K(W)-ZK-ENG-0224.indd 21
2015/3/12 15:33:57