Better Quality
Best Quality
Good Quality
18
Connecting the Video Out to TV
17
CONNECTIONS
The Component input may be marked ‘DVD input’
depending on the TV.
•
If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or
display nothing.
Note
Connect if the TV component input supports the resolution of over 576p(480p).
Connect if the TV has an HDMI (or DVI) In jack.
Connect the Video Out to the Video
In on the TV.
1
Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.
2
Method1
When you connect to Video Out
Connect the HDMI Out to the HDMI
(or DVI) Input on the TV.
1
Set the Video Input source on your TV
to the corresponding HDMI output on
your Home Theater.
2
Method 3
When you connect to HDMI Out
Connect the component output (P
R
,
P
B
, Y) to the component input on the
TV (P
R
, P
B
, Y).
•
Be sure to make the correct connections between the
when you connect the component output jacks to the
TV. If these are connected wrong, the screen may show
red or blue, or there may be no screen at all.
1
Set the Video Input source on your TV
to the corresponding Component
output on your Home Theater.
2
Method 2
When you connect to Component Out
•
If you connect the HDMI and Component outputs (P
R
, P
B
, Y) at the same time, the Component output
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 576p(480p), the HDMI and Component outputs
are all converted to 576p(480p), even if you select the resolution switch to 1080i.
•
Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a
576i(480i) DVD resolution output to 576p(480p)/720p/1080i.
•
You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has an
HDMI Input jack, output is automatically converted to the resolution of 1080i.)
•
Audio will not be output if decoder is not embedded in TV during 5.1 channel disk playback.
•
Component output will give video in ‘576p(480p)’ mode only during DVD disc playback applied with
Macrovision.
•
Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using
HDMI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.
•
When both HDMI connector and COMPONENT connector are connected, COMPONENT video is not
displayed.
•
See your TV owner's manual for more information on how to select the TV's Video Input source.
Note
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video and audio signals digitally without the process of
converting to analog. You can get sharper digital pictures by connecting the video to
the TV using an HDMI connection cable.
Video Cable
(supplied)
HDMI Cable
(supplied)
HDMI/DVI Cable
(supplied)
or
