Samsung HP-R4252, Owner'S Instructions Manual

Page: 45 / 146

45
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels
in sequence. You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”.
When you use the number buttons, you can directly select channels that
were either erased or not memorized. To change to single-digit channels
(0~9) faster, press “0” before the single digit. (For channel “4” press “0”,
then “4”.)
Notes
• For quick channel change, press the number buttons and then press
ENTER button.
• After the process of updating the channel information using CableCARD
has been completed, only the number of channels on the channel list can
be directly accessed.
Using the PRE-CH button to select the previous channel
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then,
use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
Press the VOL or VOL button to increase or decrease the volume.
Using Mute
Using the MUTE Button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and the sound cuts off. The word “MUTE” will
appear in the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply press the
VOL
or VOL button.
MUTE
BN68-00835A-00(036~049) 4/6/05 8:22 PM Page 45