Samsung HP-R4252, Owner'S Instructions Manual

Page: 92 / 146

92
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows
Desktop, then click on Properties.
The Display Dialog-Box will be displayed.
2. Click on Settings, then set the Display Mode
with reference to the Display Modes Table.
You do not need to change the Colors settings.
3. Click on Advanced. A new settings dialog box
will be displayed.
4. Click on the Monitor tab, then set the
Screen Refresh Rate with reference to the
Display Modes Table. Set the Vertical
Frequency and Horizontal Frequency
individually if you can do so instead of setting
the Screen Refresh Rate.
5. Press the OK button, close the window, then
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6. Shutdown the PC, and connect it to your TV.
(See page 90)
• The actual screens on your PC may look
different, depending on your particular
version of Windows and the type of your PC.
• When you use your TV as a PC monitor, it
supports Colors up to 32 bits.
• In this case, the display on the TV may look
different depending on your particular version
of Windows or the PC manufacturer.
• When connecting a PC (including the DVI
connection), you must set it to the display
settings that are supported by the TV.
Otherwise, the message Out of input
range will be displayed.
Continued...
2
3
4
5
BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 92