iii
Caring for water/dust/shock-proof capability
Cleaning after using the product under/near water
After using the product in water, rinse to remove foreign
substances or salt from the product within 1 hour.
1
Gently shake the product to rinse after sinking it in clean water
for 2~3 minutes.
Hold the product with the cleaned part facing down, and then gently
shake the product.
Bubbles may appear when the product is soaked in water. This is not
a malfunction.
When the product is not rinsed completely, the waterproof
performance may deteriorate.
Press each button of the product to remove salt or other foreign
substances between/around the buttons.
Do not use chemicals to clean the product including soap, neutral
detergent or alcohol. It may damage the product’s water-proof
capability.
•
•
•
•
•
2
Wipe off the water droplets from the product with a soft and dry
cloth after removing it from water.
3
Dry the product completely in a well ventilated and shaded
area.
This product is designed to be well drained. The water drains through
the small holes around the buttons on the product.
Do not use a device such as a hair dryer to dry the product. The water-
proof performance may deteriorate or the appearance of the product
can be transformed.
Do not open the memory card/HDMI jack cover and the USB plug cover
until the wet product is dried out.
•
•
