142
Adjusting the image during recording
Symptom
Explanation/Solution
Focus does not adjust
automatically.
Set
“Focus”
to
“Auto.”
page 70
The recording conditions are not suitable for auto focus. Adjust the
focus manually.
page 70
The lens is dusty on the surface. Clear the lens and check the
focus.
Recording is being made in a dark location.
Use a light to brighten the area.
•
•
•
•
The image appears too bright or
flickering, or changes in colour.
This may occur when you make a recording under a fluorescent
sodium or or mercury lamp.
Cancel
“iSCENE”
to avoid or minimise this phenomenon.
page 61
•
Image’s colour balance is not
natural.
White balance adjustment is required. Adjust to the proper
“White
Balance.”
page 64
•
The subject passing by the frame
appears very quickly.
This is called the focal plane phenomenon. This is not a
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, the subject passing by the frame rapidly
may appear to bend, depending on the recording condition.
•
Playback on your camcorder
Symptom
Explanation/Solution
Playback (play/pause) function does
not work.
Image files recorded using another device may not be played on
your camcorder.
Check out the memory card compatibility.
page 33
•
•
Photo images stored on a storage
media are not displayed in the
actual size.
Photo images recorded on other device may not appear in the
actual size. This is not an error.
•
Playback is interrupted
unexpectedly.
Check if the AC power adaptor or battery back is properly
connected and secure.
•
troubleshooting
