127
Use the provided USB cable. (Supplied by Samsung)
Insert a USB after checking the direction of its insertion is correct.
We recommend using the AC power adaptor as the power supply instead of the battery.
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will
stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with
other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the
PC and reconnect the camcorder.
According to your computer type, the Intelli-studio programme may not automatically run. In this case,
open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and run iStudio.
exe.
•
•
•
•
•
•
•
USING THE Intelli-studio PROGRAMME
Using the Intelli-studio programme
built-in your camcorder, you can
transfer video/photo fi les onto
your PC and edit them on your
computer. Intelli-studio offers
the most convenient way for
you to manage the video/photo
fi les by using the simple USB
cable connection between the
camcorder and your PC.
Step 1. Connecting the USB cable
1.
Set the “
USB Connect: Mass Storage
” and “
PC Software: On.
”
You will fi nd the default menu settings are set as the above.
2.
Connect the camcorder and the PC with the USB cable.
A new fi le saving screen appears with the Intelli-studio main
window.
According to your computer type, the corresponding removable
disk window appears.
3.
Click “
Yes,
” the uploading procedure will start. Click “
Yes
” to confi rm.
If you do not want to save a new fi le, select “
No.
”
•
•
•
•
After completing the data transfer, make sure to disconnect the cable in the following way:
1.
Click the “
Safely Remove Hardware icon
” icon on the taskbar.
2.
Select “
USB Mass Storage Device,
” and then click “
Stop.
”
3.
If the “
Stop a Hardware device
” window appears, click “
OK.
”
4.
Disconnect the USB cable from the camcorder and PC.
To disconnect the USB cable
1$4PGUXBSF
64#$POOFDU
57$POOFDU(VJEF
"OZOFU
)%.*$&$
3FNPUF
0GG
0O