78
Wireless network (HMX-QF20 only)
Using Auto Backup to send videos or photos
Installing the program for Auto backup on
your PC
1
Connect the camcorder to a PC with the USB cable.
2
Turn on the camcorder.
The computer recognizes the camcorder and Intelli-studio
launches automatically.
3
When the pop-up window for the Auto backup installation
program appears on the PC screen, click
OK
.
To install the program, follow the instructions on the pop-up
window.
After the installation is complete, disconnect the camcorder
from the PC, and then reconnect the camcorder for the PC to
confirm the server information message.
To run the program, disconnect the camcorder from the PC.
This program is for backing up files to Windows PCs.
Sending photos or videos to a PC
1
Press the [
Home
(
)] button
p
touch
Auto Backup
.
Social Sharing
Auto Backup
TV Link
Settings
•
2
•
•
•
•
2
Touch the
Confirm
tab.
The camcorder will automatically attempt to connect to a WLAN
via the most recently connected AP device.
If the camcorder has not previously been connected to a
WLAN, it will search for available AP devices.
¬
page 72
If your PC is on, the PC recognizes the camcorder and Intelli-
studio launches automatically.
If your PC supports the Wake on LAN (WOL) feature, you can
turn on the PC automatically by searching for the PC from your
camcorder.
¬
pages 79~80
3
The camcorder will prepare the files and then send them to
the PC.
You cannot select individual files to send. This function only
sends files that have been newly stored on the camcorder.
The progress will be shown on the PC monitor.
The camcorder will search for available access points even if you are
connecting to the same access point again.
If you turn off the camcorder or remove the battery while sending
files, the file transfer will be interrupted.
While you are using this feature, the buttons on the camcorder will
be disabled.
You can connect only one camcorder to the PC at a time for sending
files.
The backup may be canceled due to network conditions.
Videos or photos can be sent to a PC one time only.
Files cannot be sent again even if you reconnect your camcorder.
•
•
•
•
•
•
•
•
•
•
•
•
•
