Samsung HLK436W, Instruction Manual

Page: 17 / 20

Operation Operation
32 33
Channel Memory
Your TV can memorize and store all of the channels available. Once the channels are memorized,
you can use the CH
and CH buttons to scan through the available channels.
Selecting the Broadcast Source
Before memorizing available channels, you must select what broadcast source your TV is connect-
ed to, either an antenna or a cable system.
1
Press the Menu button on the
remote control to display the
on-screen menu.
2
Move the joystick down to
select SETUP, then press
the joystick to enter.
3
Press the joystick to enter. The
channel setup menu will
appear. Move the joystick
down to select “Air or CATV”.
4
If you are connected to an anten-
na, leave “AIR” displayed. If you
connected cable, press the joystick
to the right to display the type of
cable system: “STD,” “HRC,” or
“IRC.” (If you are not sure which
type of cable system you have,
contact your cable company.)
Storing Channels in Memory Automatically
1
First, select the broadcast source as
described on the previous page. With
the CHANNEL SETUP menu on screen,
move the joystick down to select “Auto
channel memory.”
2
Press the joystick to enter. The TV will
begin memorizing all of the available
stations. Move joystick right or left at
any time to interrupt the memorization
process.
If the TV set stops operation when AUTO
PROGRAM runs, it is recommended to
re-run the program.
Note: When the ANT B mode is selected, the auto programming
runs on the main screen.
Adding and Erasing Channels
1
Use the number buttons to select the
channel you want to add or erase.
2
To add a channel, select it and press the
Add/Erase button on the remote control.
The channel will be added to the TV’s
memory and the word “Add” will
appear in the corner of the screen.
3
To erase a channel, select it and then
press the Add/Erase button on the
remote control. The word “Erase” will
appear in the corner of the screen. You
can still view a channel that has been
erased from memory by using the num-
ber buttons on the remote control to
select the channel directly.