Samsung GEMS-H Instructions For Use Manual Download Page 46

Page: 46 / 79

SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)

Page 46 of 79

6.7.2.2. Set assist mode

①

By pressing the “Set Assist Mode” button, the therapist can change the assist mode and parameters.

②

At present, only the Walk Assist mode is provided.

③

Pre‐saved assist parameters can be selected. The default parameters are available as “Normal,” and an

additional saved parameter set called “Strong” is available by default.

④

Assist parameters can be saved with a user‐defined name using the “Save” button.

⑤

Parameters that are no longer needed can be deleted with the “Del“ button. The default parameters cannot be

deleted.

⑥

Select the “log” check box to automatically log data when the assist starts. If you are interested in using your log

data for research or other purposes, please contact the manufacturer.

Summary of Contents for GEMS-H
















































































Search results

Summary of Contents for GEMS-H

Reviews:

Brands by name

Popular brands

Samsung GEMS-H, Instructions For Use Manual

Search results

Summary of Contents for GEMS-H

Reviews:

Brands by name

Popular brands