![background image](http://html.mh-extra.com/html/samsung/galaxy-ring/galaxy-ring_user-manual_339857135.webp)
Health and Safety Information 131
These FCC RF exposure limits are derived from
the recommendations of two expert
organizations: the National Council on Radiation
Protection and Measurement (NCRP) and the
Institute of Electrical and Electronics Engineers
(IEEE). In both cases, the recommendations were
developed by scientific and engineering experts
drawn from industry, government, and academia
after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The RF exposure limit set by the FCC for wireless
mobile phones employs a unit of measurement
known as the Specific Absorption Rate (SAR).
The SAR is a measure of the rate of absorption of
RF energy by the human body expressed in units
of watts per kilogram (W/kg). The FCC requires
wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg).
The FCC SAR limit incorporates a substantial
margin of safety to give additional protection to
the public and to account for any variations in
measurements.
SAR tests are conducted using standard
operating positions accepted by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands. Although the
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum
reported value. This is because the phone is
designed to operate at multiple power levels so
as to use only the power required to reach the
network. In general, the closer you are to a
wireless base station antenna, the lower the
power output of the phone.
Before a new model phone is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the SAR limit
established by the FCC. Tests for each model
phone are performed in positions and locations
(e.g. at the ear and worn on the body) as
required by the FCC. For body-worn operation,
this phone has been tested and meets FCC RF
exposure guidelines when used with an
accessory that contains no metal and that
positions the mobile device a minimum of 1.0
cm from the body.
Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization
for this mobile device with all reported SAR
levels evaluated as in compliance with the FCC
RF exposure guidelines. The maximum SAR
values for this model phone as reported in the
FCC equipment authorization are:
•
Head: 0.60 W/kg
•
Body-worn: 1.34 W/kg
SAR information on this and other model phones
can be accessed online on the FCC's website
through
http://transition.fcc.gov/oet/rfsafety/sar.html
.
To find information that pertains to a particular