76
Apps
Osaifu-Keitai
The function allows you to use "Osaifu-Keitai compatible service" for
payment or coupon by just holding over a store reader, or " かざして
リンク対応サービス (Kazashite-Link compatible service)" for accessing
information by holding over home electrical appliances, smart poster,
etc.
You can save electronic money and points to an IC card of the terminal
and a docomo nano UIM card. Also, you can check balance of electric
money and point value on the screen.
By locking Osaifu-Keitai functions, you can prevent the terminal from
being used without your permission in case of theft or loss.
For details on Osaifu-Keitai, refer to NTT DOCOMO website.
• A setting from the dedicated website or app is required to use Osaifu-
Keitai compatible services.
• The data in the IC card
*1
and docomo nano UIM card
*2
may be lost or
altered from malfunction of the terminal (when we repair your Osaifu-
Keitai etc., as we cannot repair it with data remained, you are required
to erase the data by yourself). For support such as reissue, restoration,
temporary preservation or transfer of data, contact Osaifu-Keitai
compatible service providers. For important data, be sure to use a
service with backup service.
• If you use a docomo nano UIM card of the previous model, to use Osaifu-
Keitai compatible services, install and set the app of Osaifu-Keitai
compatible service providers.
• If the data in the IC card or docomo nano UIM card is lost, altered or
damaged by any means related to Osaifu-Keitai compatible service such
as malfunction or model change, DOCOMO is not liable for the loss of data.
• If the terminal is stolen or misplaced, immediately contact Osaifu-Keitai
compatible service provider for an advice.
*1 Data saved to IC card in the Osaifu-Keitai compatible device
*2 Data stored on a docomo nano UIM card
Using "Osaifu-Keitai compatible service"
To use Osaifu-Keitai compatible service, download Osaifu-Keitai compatible
app from Osaifu-Keitai compatible site before setting up. Depending on
service, Osaifu-Keitai compatible app does not require to be downloaded.
1
From the Home screen, "Osaifu-Keitai"
• Obtain service information and update a service list.
• When Osaifu-Keitai initial setting screen appears, follow the onscreen
instructions.
2
"Recommend" → Tap service you want to use
3
Set up the service
4
Hold mark over the reader
• Communication with reader is available.
Information
• You can read/write data from/to a reader without activating Osaifu-
Keitai compatible app.
• Powering on the terminal is not necessary, but if the terminal remains
powered off for a long time or battery is low, the function may not be
available.
• Depending on your installed Osaifu-Keitai compatible app or its
settings, your terminal may not respond even when you hover it over
an IC card reader if the screen is locked or if the screen backlight of
the terminal is OFF.
• Note that if you do not subscribe sp-mode, a part of Osaifu-Keitai
services may not available.
• The Osaifu-Keitai compatible app performs communication which is
necessary for providing the Osaifu-Keitai service in the background
regardless of the setting of "Power saving mode" (P.108) or "Data
saver" (P.101), and the packet communication charge may be
incurred.
• After the power of the terminal is turned on or the terminal is
restarted, cancel the screen lock and then hold over a reader to use
the Osaifu-Keitai service.