![background image](http://html.mh-extra.com/html/samsung/galaxy-feel/galaxy-feel_instruction-manual_339482143.webp)
141
Appendix/Index
Updating software
About Software Update
Download update file for the terminal from the download site on the
Internet and update the software. For software update, there are 2
methods; connecting to the network directly on the terminal and using
Galaxy Smart Switch PC (P.126) installed to a PC.
Precautions on software update
Software update can be done with the data saved to the terminal
remained. However, note that depending on your terminal condition
(malfunction, damage, water-soaked, etc.), the data may not be protected.
You are recommended to back up the user information and data in the
terminal just in case. However, some data may not be backed up.
• Prepare the followings before software update.
- Exit all programs running on the terminal (P.44)
- Charge the terminal (P.26) to make the battery level enough.
• For updating software by connecting the terminal to network directly,
you are recommended to perform in a place with good signal condition,
without moving. When the signal condition is bad, software update
maybe interrupted.
• It may take time to update software (download and installation of update
files).
• During the installation of the update files for software update, all
functions including making/receiving phone call are not available.
• When you cannot perform any operations because of the failure of the
software update, please take your terminal to DOCOMO-specified repair
office.
Updating software only with the terminal
You can update the software of the terminal by connecting network with
the terminal.
1
From the Home screen, → "Settings" → "Software
update"→ "Download updates manually"
• If you permit downloading a file only when connecting via Wi-Fi, set
"Download updates automatically" to ON.
2
Operate following the onscreen instructions
• After update file is downloaded and operation for update is
performed, the terminal restarts and update starts. During update,
some functions such as making calls cannot be used.
Information
• After downloading the software, you may postpone the installation
by tapping either "LATER" or "INSTALL OVERNIGHT" on the
installation confirmation screen.
You can start the installation immediately by performing the following
steps, even after you have postponed the installation:
- From the Home screen, → "Settings" → "Software update" →
"Download updates manually" → "INSTALL NOW"
- Open the notification panel → "Software update" → "INSTALL NOW"
• Depending on update contents, available network may be restricted.