Samsung Freezer, User Manual

Page: 7 / 44

setting up _07 setting up _07
01
SETTING
UP
6.
Unscrew 3 bolts tightening the hinge and also
unscrew 3 bolts on the bottom right side by the
front leg where removed hinge will be attached.
7.
Separate the hinge shaft by using hex wrench
first. Unscrew the bolt to remove the hinge riser
and switch the side of the hinge shaft and the
hinge riser.
8.
Attach the hinge on the bottom right side of the
freezer where bolts were previously removed in
step 6. Screw the bolts that were removed on
the bottom left side of the freezer for the future
usage.
9.
Remove the screws on the bottom right and left
side of the freezer door. Switch the side of the
door stopper from left to the right. Hinge riser
should be switched as well.
10. Remove the wire cover on top of the freezer door
to switc h the side of the wires.
2.
Remove the plastic cover and make sure to
disconnect the wire connected to it.
After removing the plastic cover, check the parts
for reversing the door.
Be careful not to damage the electrical wires
when removing the p
lastic cover.
3. Disconnect the wires and then remove 3 bolts.
Make sure your freezer is unplugged before
handling electrical wires.
4.
Remove the door from the lower hinge by
carefully lifting the door straight up.
Freezer door is heavy, be careful not to injure
yourself when removing the freezer door.
5. Separate the front leg cover after removing 2
screws.
CAUTION
CAUTION
WARNING
Screws
10mm
10mm
Hinge shaft
8mm Bolt
Hinge riser
10mm
10mm
Hinge riser Hinge riser
DA99-01951G(EN-1)-0.5.indd 7 2010.12.22 10:10:5 AM