11
Location
Symbol
Function
7
Current time or times for timer functions
8
Shows that the compressor is running
and the outdoor unit is heating
Shows that the backup heater/boiler is running
(if applicable)
Shows that the Immersion heater is running
Shows that the hybrid boiler is running (Hybrid systems only)
9
Shows that the water circulation pump is running
Shows that the hot water valve is open and the heat pump is
heating the hot water cylinder
Shows that the unit is in defrost mode
see defrost video on you tube
Shows that the unit is in freezing control mode (when the outdoor
temp us below 10°C the unit runs the water circulation pump all
the time to keep the water in the system from freezing.
Shows that Legionella mode is active
10
Shows that the unit is running off of an external thermostat
This shows that the button you pressed can’t be used at this time
(No function)
11
Shows when unit is in test mode.
This icon shows that you someone should check the unit
(Normally shows with a fault code)
Shows the remote is locked
13
Shows that unit is checking the cylinder and will heat it when the
temperature drops below the set point
Shows that the unit is running in a forced hot water mode
14
Eco level operation (1-5)
Handover of the System
Installation Manual.indd 11
31/08/2018 19:01:15
