Samsung FlexWash WV16M9945K Series User Manual Download Page 38

Page: 38 / 80

Before you start

English

Lower washer

•

Main wash compartment (A)

: Add a

recommended amount of liquid (or
powdered) detergent to the main wash
compartment.

•

Softener compartment (B)

: Add a

recommended amount of fabric
softener to the softener compartment.

CAUTION

• Do not use ball or net types of detergent.
• Do not put tablet or capsule types of detergent in the detergent compartment. Tablet

or capsule types of detergent must be put directly in the drum.

• To prevent the compartment from clogging, concentrated or highly-enriched agents

(fabric softener or detergent) must be diluted with water before being added.

• Powdered detergent should be thoroughly dissolved in a small amount of warm water

before adding to the machine.

To apply cleaning agents to the lower washer

Open the top-front cover.

Add a recommended amount of liquid

or powdered detergent to the detergent
compartment. Do not exceed the

max

line (A)

NOTE

To apply powdered detergent, first remove
the liquid detergent container.

FlexWash_DC68-03768L-00_EN.indd 38

2017-09-13 2:26:15

Summary of Contents for FlexWash WV16M9945K Series

















































































Search results

Summary of Contents for FlexWash WV16M9945K Series

Reviews:

Related manuals for FlexWash WV16M9945K Series

Brands by name

Popular brands

Samsung FlexWash WV16M9945K Series, User Manual

Search results

Summary of Contents for FlexWash WV16M9945K Series

Reviews:

Related manuals for FlexWash WV16M9945K Series

Brands by name

Popular brands