Samsung ELSR362-00004 Installation Manual Download

Page: 9 / 103

1. About this Manual

About this Manual

1.1

Valid Range

This is the installation manual for the 3.6 kWh All In One system. Please read this installation

and user manual carefully before installing and operating the 3.6 kWh all in one system.

It contains important safety instructions. The warranty will be void if you fail to follow the

instructions in this manual.

1.2

Target Group

This installation manual applies only to the Samsung 3.6 kWh All in One.

1.3

Manual Storage

The user manual and installation manual can be downloaded from the product download
section at

“

https://myess.samsungsdi.com

”

. The specifications of the product can be

changed for improvement without notice.

Also, the software can be updated automatically without notice over the Internet.

1.4

Symbols Used

Symbols

Meaning

CAUTION

This symbol indicates a hazardous situation which could

result in a light injury, if not avoided.

NOTICE

This symbol indicates a hazardous situation which could

result in damage to the property, if not avoided.

Information

This symbol indicates valuable tips for optimum installation

and operation of the product.

Australia (Eng.) 05/2015. Rev1.1

Summary of Contents for ELSR362-00004








































































































Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands

Samsung ELSR362-00004, Installation Manual

Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands