7. Entering Initial Installation Information
7.4.6
Changing the Inverter
’
s Output Setting
On the menu, select
“
Control
”
and
“
ERM
”
for the Operation Mode. Then, select
“
NOP
”
for
the ERM Mode 1,
“
BOTH
”
for the ERM Mode2, and
“
Inverter Power Limit
”
for the ERM Mode
3. And then choose either
“
3.6 kW
”
or
“
4.6 kW
”
for Inverter Limit. Click the
“
ADD
”
button
to select the product(s) that you want to apply this change to.
[Figure 7-8: ESS output setup page]
Add all the products you want to control, then click the
“
Control Now
”
button to start
controlling them. You can check all the changes made to
“
ESS Information
”
(It may take
about 5 minutes to update such changes to this item).
[Figure 7-9: PCS information page]
Australia (Eng.) 05/2015. Rev1.1
59
