2 _ Safety Instructions
While Servicing
ࣃ
Check if the power cable is damaged, flattened, cut or otherwise degraded.
➢
If faulty, replace it immediately.
Failure to do so may result in electric shock or fire.
ࣃ
Completely remove any dust or foreign material from the housing, wiring and connection
parts.
➢
This will prevent a risk of fire due to arcing and short circuits in advance.
ࣃ
When connecting wires, make sure to connect them using the correct connectors and
check that they are completely connected.
➢
If tape is used instead of the connectors, it may cause fire due to arcing.
ࣃ
Make sure to disconnect the PBA power terminals before starting the service.
➢
Failing to do so may result in a high voltage electric shock.
ࣃ
When replacing the heater, make sure to fasten the nut after ensuring that it is inserted
into the bracket-heater.
➢
If the nut is not fastened correctly, it can cause a water leak.
After Servicing
ࣃ
Check for any water leakage.
➢
Perform a test using the standard(normal) cycle and check whether there is any
water leakage through the floor section or the pipes.
ࣃ
Do not allow consumers to repair or service any part of the dishwasher themselves.
➢
This may result in personal injury and shorten the product life.
ࣃ
If it seems that grounding is needed due to water or moisture, make sure to run
grounding wires.
➢
Failure to do so may result in electric shock due to electric leakage.
