10 _ Disassembly and Reassembly
3-2. STANDARD DISASSEMBLy DRAWINGS
Throughout this manual, features and appearance may vary from your model.
Warning
Always disconnect the electric power supply & water supply before servicing
any electrical component, making
ohmmeter checks, or replacing any parts.
Caution
Before moving the unit, laying it down for service, or removing any parts for service be sure to drain as much of the water
from the unit as possible. Use a protective mat or towel to prevent damage to the floor or having any of the remaining
water spill on the floor.
All voltage checks should be made with a voltmeter having a full scale range of 250 volts or higher. After service is
completed, be sure all safety grounding circuits are complete, all electrical connections are secure, and all access
panels are in place.
Before servicing, make sure to remove all items from inside of the dishwasher, including the wash racks.
※
Reassembly is in the reverse order of the removal.
Part
Figure
Description
Main PBA
Preparation:
•
Make sure to disconnect the power.
1.
Main-PBA is located under the
door.
2. Remove the two (2) screws of PBA case
and pull out the PBA cover carefully.
3. Remove all connectors on the PBA.
4. Remove the two (2)
screws on the PBA
board .
5. Pull out the PBA board carefully.
When removing the Main PBA, lift the PBA
board up carefully because
it is hanging on
the PBA case by two (2) hooks.
The
