Samsung DW60A6080 Series Repair Manual Download

Page: 28 / 32

28 _ Disassembly and Reassembly

2-11. BASKET 3RD

- Basket 3RD : DD82-01893B / SVC ASSY-BASKET 3RD (DW60A609*)

Part

Figure

Description

BASKET 3RD

BASKET

3RD TRAY

[DISASSEMBLY]

1. Lift up the BASKET 3RD TRAY and separate it.

ASSY ROLLER

3RD

2. Release the hook of the ASSY ROLLER 3RD fixed

to the WIRE FRAME 3RD and separate it.

3. Remove the HANDLE BASKET by lifting the 2 RIB.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

Caution

Be careful not to break the hooks.

[ASSEMBLY]

1. Assemble the BASKET 3RD with the ASSY

ROLLER 3RD and the HANDLE BASKET together.

Warning

Do not do this work without safety gloves. It may

cause injury from sharp edges.

Caution

Be careful not to break the hooks.

Summary of Contents for DW60A6080 Series

































Search results

Summary of Contents for DW60A6080 Series

Reviews:

Related manuals for DW60A6080 Series

Brands by name

Popular brands

Samsung DW60A6080 Series, Repair Manual

Search results

Summary of Contents for DW60A6080 Series

Reviews:

Related manuals for DW60A6080 Series

Brands by name

Popular brands