82 -
English
R
ecording
Copying from a Camcorder
1
Connect the DV output jack of your camcorder to the
DV input jack on the front of your HDD & DVD
RECORDER using a DV cable.
2
Press the
HDD
or
DVD
button.
If you select DVD, Press the
OPEN/CLOSE
button and
place a recordable disc on the disc tray. Press the
OPEN/CLOSE
button to close the disc tray. Wait until
LOAD disappears from the front panel display.
3
Press the
REC MODE
button repeatedly to select
the recording speed(quality).
➞
SP
➞
LP
➞
EP
➞
XP
You may control the Camcorder using the IEEE1394 (DV)
interface.
4
Press the
INPUT
button to select
DV
.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
5
Select the Play (
√
) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
You can press the
PLAY (
)
button of the remote
control to play the camcorder.
6
To start recording, use the
œ √
buttons to select
Record (
●
) icon in the top side of the screen, then
press the
OK
button.
You can press the
REC
button of the remote control
to start recording. To display playback related icons
on the screen, press any direction button on the
remote control.
- To stop recording -
Press the
STOP (
)
button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the
message “Updating the information of disc.
Please wait for a moment” is displayed
DV
The DV device is connected.
RETURN
SELECT
MOVE
Record Mode
SP 031:39
6-00819A-XEU_77-94_REC 4/29/05 10:10 PM Page 82