Samsung DVD-V90K, Instruction Manual

Page: 19 / 37

35 34
Selecting the Audio Output Mode
Playing a Cassette in Slow Motion
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the
声音（AUDIO）
button on the
remote control until the required option is displayed.
L R MIX
L R MONO
You can play a cassette in slow motion.
➢
No sound is heard when playing back a cassette in slow
motion.
1
Press:
◆ ll to start playing the cassette
◆ ll button one more time to make still mode.
◆ to start SLOW mode.
◆
or
button as many times as required to decrease or
increase the speed respectively
◆ To
返回(return)
to the normal speed, press the ll button
twice.
2
When playing back in slow motion, picture interference may occur.
Press the
磁迹跟踪（TRK）
( or ) buttons to minimize this
effect.
☛
When you have been using the Slow Motion function for
more than about two minutes, the DVD-VCR will
automatically play to protect the:
◆ Cassette
◆
Video heads
2
2
1
1
VCR
VCR
This function allows you to play back any pre-recorded cassette.
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ll.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
3
To... Then press...
Stop the playback
■
Eject the cassette
Playing a Cassette
3
2
3
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the
磁迹跟踪（TRK）
( or ) buttons until the
picture is clear and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
VCR
VCR
DVD-90K_CHN-GB2.q 2003.4.11 11:16 AM 页面34