English
-
9
Your TV must support progressive scan input
to allow you to watch component video output.
You will enjoy high quality accurate colour
reproduction images. Component video seper-
ates the picture element into black and
white(Y), blue(Pb), red(Pr) signals to present
most clear and clean images.
1
Connect Component video cables between
the
COMPONENT VIDEO OUT
jacks on the
rear of the DVD-VCR and
COMPONENT
VIDEO IN
jacks on the rear of the TV
.
2
Connect audio cables between the
AUDIO
LINE OUT
jacks on the rear of the DVD-VCR
and
AUDIO IN
jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
Connecting DVD-VCR to the TV
using the Component Video Cable
COMPONENT VIDEO IN
COMPONENT INPUT
1
2
If the TV connected supports Progressive Scan,
press the
P.SCAN
button on the front panel in
stop mode.
• The message “Press OK to confirm
Progressive scan mode. Otherwise press
RETURN.” will be displayed. If you want
Progressive scan mode, select OK. Make
sure that the disc has stopped completely
before changing the mode.
• To cancel the progressive scan mode, press
the
P.SCAN
button in stop mode.
•
Do not press the
P.SCAN
button if you are using a
TV that does not support Progressive mode.
Nothing will be displayed on the screen if pressed.
To release the Progressive mode, press the
P.SCAN
button in stop mode.
•
See your TV User’s Manual to find out if your TV
supports Progressive Scan.If Progressive Scan is
supported, follow the TV User’s instructions regard-
ing Progressive Scan settings in the TV’s menu
system.
•
Depending on your TV, the method of connection
may differ from the illustration above.
•
What is "Progressive Scan"? Progressive scan has
twice as many scanning lines as the interlace out-
put method has. Progressive scanning method can
provide better and clear erpicture quality.
•
You must connect the player to the component(s)
before using the Progressive Scan feature.
•
Make sure that the colour coded connections
match. That is, the Y, Pb and Pr component output
jacks of your DVD -VCR should be connected to
the exact corresponding component input jacks on
your TV. Otherwise, red or blue images will be dis-
played on the TV screen.
•
NTSC DVD disc is not supported.
Note
Progressive Scan (DVD only)
AFR 6600K ENG 2 27/07/2006 08:42 Page 9
