ENG-11
Presetting the Stations Automatically
☛
You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 9).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 9)
◆
Automatically
◆
Manually (see page 12)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding
,
❷
buttons to select
the Install option.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
4
Press the corresponding
,
❷
buttons, until the
Auto Setup is selected.
And then press the OK or
❿
to select this option.
Result: A message appears, indicating that any
channels already preset on your DVD-VCR
will be deleted.
5
Press OK to start the auto scanning.
Result:
◆
The Please Wait indication highlight on
the television screen.
◆
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
The DVD-VCR then searches for the
second station and so on.
◆
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
6
If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
➢
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required .
(See page 13)
Australia
Model
Newzealand
Model
Auto Setup
Please Wait
15%
Auto Setup
Your data will be lost
Press OK to continue
Menu to exit
