G
etting Star
ted
English -
5
CD-R/-RW
Use a 700MB (80 minutes) CD-R/-RW disc. If possible,
do not use a 800MB (90 minutes) or above disc, as the
disc may not play back.
If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded fi les may not play.
Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to burn
them. For contents recorded on CD-R/-RW media from
CDs for your personal use, playability may vary
depending on contents and discs.
DVD±R Disc Playback and Recording
Once a DVD±R recorded in Video Mode is fi nalised, it
becomes DVD-Video.
You can record onto the available space on the disc and
perform editing functions such as giving titles to discs
and programmes and erasing programmes before
fi nalising.
When programming is erased from a DVD±R, that
space does not become available. Once an area on a
DVD±R is recorded on, that area is no longer available
for recording, whether the recording is erased or not.
It takes about 30 seconds for the unit to complete
recording management information after recording
fi nishes.
This product optimizes the DVD±R for each recording.
Optimizing is carried out when you start recording
after inserting the disc or turning on the unit.
Recording onto the disc may become impossible if
optimizing is carried out too many times.
Playback may be impossible in some cases due to the
condition of recording.
This unit can play back DVD±R discs recorded and
fi nalised with a Samsung DVD video recorder. It may
not be able to play some DVD±R discs depending on
the disc and the condition of the recording.
DVD-RW Disc Playback and Recording
Recording and playback can be performed on DVD-RW
discs in both the Video and VR Modes.
Once a DVD-RW recorded in both the Video and VR
Modes is fi nalised, you cannot perform additional
recording.
Once a DVD-RW recorded in Video Mode is fi nalised, it
becomes DVD-Video.
In both modes, playback can be performed before and
after fi nalisation, but additional recording, deleting and
editing can not be performed after fi nalisation.
If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format. Be careful
when executing Format because all the recorded data
may be lost.
◆
•
•
•
◆
•
•
•
•
•
•
•
◆
•
•
•
•
•
A DVD-RW blank disc is initialised to VR Mode when
fi rst initialised.
DVD+RW Disc Playback and Recording
With DVD+RW discs, there is no diff erence between
DVD-Video format(Video mode) and DVD-Video
Recording format(VR mode).
Finalising is generally unnecessary when using a
DVD+RW disc.
DVD-RAM Disc Playback and Recording
Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the
recording.
You cannot play a DVD-RAM in most DVD components
due to compatibility issues.
Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
DVD-RAM recorded on this unit may not work with
other DVD components. To determine compatibility
with these DVD-RAM discs, refer to the user’s manual
for the player.
For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
Disc Copy
Title Copy Specifi cations
Contents
HDD
➔
DVD
DVD
➔
HDD
Recorded Video
Title
Supported
Supported
Copy Protected
Title
Not supported
Not supported
Copy Once Title
Move
(Deletes the Title in the
HDD after copying)
Not supported
Once “Copy Once programme” has been recorded on the
DVD disc, this title cannot be copied to HDD anymore.
But “Copy Once programme” has been recorded on the
HDD, this title can be copied to DVD-RW (VR mode) with
CPRM or DVD-RAM.
•
◆
•
•
◆
•
•
•
•
•
01444A-SH855M-XEU-ENG-1~24.indd 5
01444A-SH855M-XEU-ENG-1~24.indd 5
2007-07-04 오후 5:27:34
2007-07-04 오후 5:27:34
