ENG-
17
Connections
C
O N N E C T I O N S
1
Using V
ideo/Audio cables, connect the
VIDEO
(yellow)/AUDIO
(red and white) OUT
jacks on the rear of the DVD player to the
VIDEO (yellow)/AUDIO (red and white) IN
jacks of your
TV.
2
T
urn on your DVD player and TV.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD
player.
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (COMPOSITE/S-Video
➝
I-SCAN
➝
P-SCAN).
- If you set the HDMI output resolution, S-Video and component output cannot be used.
RED
WHITE
YELLOW
RED
WHITE
YELLOW
Audio Cable
Video Cable
(Included)
3
Set the V
ideo Output to
S-VIDEO
in the Display Setup menu.
(See pages 52 to 54).
You can also use the
VIDEO SEL.
button to change the V
ideo
Output mode. (See page 12)
4
Press the input selector button on your
TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Connecting to a TV (V
ideo)
