ENG-
16
C
O N N E C T I O N S
Connecting to a TV (S-V
ideo)
-
Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
Note
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of the jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- Please do not connect the S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may
interfere and degrade both video outputs quality.
- If you set the HDMI output resolution, S-Video and component output cannot be used.
1
Using an S-V
ideo cable (not included), connect the
S-VIDEO
OUT
jack on the rear of the DVD player to the
S-VIDEO IN
jack of your
TV.
2
Using the audio cables, connect the
AUDIO (red and white)
OUT
jacks on the rear of the DVD player to the
AUDIO (red
and white) IN
jacks of your
TV.
Turn on your DVD player and TV.
4
Press the input selector button on your
TV remote control until
the S-Video signal from the DVD player appears on your TV
screen.
3
Set the V
ideo Output to
S-V
ideo
in the Display Setup menu.
(See pages 52 to 54)
You can also use the
VIDEO SEL.
button to change the V
ideo
Output mode. (See page 12)
RED
WHITE
RED
WHITE
Audio Cable
S-Video Cable
(not included)
