connections
1_
connections
Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)
1
If using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL)
terminal on the rear
of the DVD player to the
DIGITAL AUDIO IN (COAXIAL)
terminal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO
,
COMPONENT
or
HDMI OUT
terminals on the rear of the
DVD player to the
VIDEO
,
COMPONENT
or
DVI IN
termi-
nals of your TV as described on pages 8 to 11.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers or to your hearing.
- Please set the audio in the menu screen according to the Amplifier. (See pages 28 to 29)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Coaxial Cable
Dolby Digital or
DTS amp
Summary of Contents for DVD-H1080
Page 40: ...AK68 01754Q 03 ...
Page 81: ...ELECTRONICS AK68 01754Q 03 ...
Page 122: ...ELECTRONICS AK68 01754Q 03 ...
Page 163: ...ELECTRONICS AK68 01754Q 03 ...