Samsung DVD-1080AV, User Manual

Page: 35 / 40

English _35
●
REFERENCE
Problem Action Page
No operation can be
performed with the
remote control.
Check the batteries in the remote control. They may need replacing.
Operate the remote control at a distance of no more than 20 feat.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to the
reset it. Reinstall batteries and try to operate the remote control again. •
•
•
P3
Disc does not play.
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD. •
•
P5
The icon appears
on screen.
The features or action cannot be completed at this time because :
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
•
Disc Menu Doesn't
appear.
Check if the disc has menu. •
Play mode differs
from the Setup Menu
selection.
Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
•
P27 ~ 33
The change ratio
cannot be changed.
The Screen Ratio is fi xed on your DVDs. • P29 ~ 31
No audio. Make sure you have selected the correct DIgital Output in the Audio Options Menu. • P28 ~ 29
The screen is
blocked.
Press the button (in front panel) for more than 5 seconds under no disc
inside. All setting will revert to factory settings.
•
P16
Forgot password.
Press the button (in front panel) for more than 5 seconds under no disc
inside. All setings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
•
P32
If you experience
other problems
Go to the contens and fi nd the section of the instruction book that contains the
explanations regarding the current problem, and follow the procedure once again.
If the problem still cannot be solved, please contact your nearest authorized ser-
vice center.
•
•
The picture is noisy
or distorted.
Make sure that the disc is not dirty or scratched.
Clean the disc. •
•
P2
No HDMI output
Check the Video output is HDMI enabled.
Check the connection between the TV and the HDMI jack of DVD player.
See if the TV supports this 480p/576p/720p/1080i/1080p DVD player. •
•
•
P13 ~ 14
Abnormal HDMI
output screen.
If snow noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
•
P13 ~ 14
HDMI output Jitter
Check your TV system setup correctly.
The screen Jitter phenomenon may occur when frame rate is converted from 50Hz
to 60 Hz for 720p/1080i/1080p HDMI (High Defi nition Multimedia Interface) Output.
Please refer to the user's manual of your TV. •
•
•
P29 ~ 31
Before requesting service (troubleshooting), please check the following.
Troubleshooting