Samsung DVD-1080AV, User Manual

Page: 34 / 40

reference
34_ reference
Introduction
Samsung will often support the software upgrade to
improve the performance of this unit to the latest sta-
tus, through Samsung Internet Site (www.samsung.
com).
Because the specially new mpeg4 codec continues and
it is appearing. What improvements are made depends
on the upgrade software you are using as well as the
software that your DVD-player contained before the
upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
Upgrade procedure
1. You have to download a new file through Download Center
of Samsung Internet Site (www.samsung.com).
2. Write the file to Disc using CD-RW of your computer.
1. Open the disc tray. Place the disc on the tray. Close the
tray. The Firmware upgrade screen appears.
Old Version : 081118.I6.B.1080P9XEG
New Version : 081212.V1.B.1080P9XEG
Firmware upgrade
appears on the display
Old Version : 081118.I6.B.1080P9XEG
New Version : 081212.V1.B.1080P9XEG
Firmware upgrade starts
- In the middle of the writing, the tray will open
automatically. After taking out the disc, please wait for
about 2 minutes.
- If the unit was succesfully updated, the unit will turn off
and on after closing the tray automatically. When the
unit turns on, this screen will display.
3. Press the number buttons to select the desired language
2. Press the
√
/
®
buttons to select Total , then press the
ENTER button.
Press 1 for English
Touche 2 pour Français
Drücken Sie 3 für Deutsch
Pulsar 4 para Español
Premere 5 per Italiano
Druk op 6 voor Nederlands
Firmware upgrade
Note
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Note
- If the “Select Menu Language” doesn’t appear,
please contact to “Samsung Service Center”.
- Do not press any button and unplug the power
code during upgrade.
- The upgrade procedure may change, refer to
the web site (www.samsung.com).