Samsung DV448AEP, Service Manual

Page: 15 / 130

Disassembly and Reassembly _ 13
Part figure Description
Door Removal
7. Remove the Support-Hinge, Hinge-Door, Guide
Holder Glass, Door Glass and Door Seal.
A. Be careful not to scratch the Cover Door.
B. Be careful of the damage to the Door Glass.
C. Check the Door Seal condition after the
assembly.
frame front
Removal
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB and the
Cover Top.
3. Remove 4 screws from the Frame Front.
When 2 screws of the top portion work because
was added newly, keep in mind.
5. Remove 3 screws.
6. Remove the Door Switch Housing.
When reassemble Door Switch to Frame Front,
be careful for insert direction.
7. Lift the Frame Front off the three tabs across the
bottom and remove.