Samsung DV448AEP, Service Manual

Page: 18 / 130

16 _ Disassembly and Reassembly
Part figure Description
Drum Removal
1. Disconnect the Power Supply to the unit.
2. Remove the Panel Control, the Main PCB, the
Cover Top, the Frame Front and the Drum Front.
3. Remove Belt.
4. Remove the Drum.
When reassemble the belt, make it located
middle of the Drum.
Sensor
(Thermistor,
Thermostat)
Removal
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB, the
Cover Top, the Frame Front, the Drum Front and
the Drum.
3. Remove 2 Housing Sensor.
4. Remove the Sensor.
Do not apply excessive force to the terminal.