Samsung DV306LEW/XAA, Service Manual

Page: 26 / 86

3-1
61#RSHUUDWLQJ#LQVWDOODWLRQV#DQG#LQVWDOODWLRQ
1. Digital Graphic Display
The display window shows the estimated time remaining in the cycle after the Cycle Selector dial is
pressed. The estimated time remaining may fl uctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate.
When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, “END” will appear in the display panel until the dryer door is opened or
Power key is pushed.
If your dryer is paused during a cycle, the indicator lights will blink until the Cycle Selector dial is
pressed.
2. Dry Level Selection Button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press the Dry Level
button. An indicator light will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads may require the
Very Dry (select models) or More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing
at the end of the cycle. Damp Dry (select models) is designed to partially dry items.
Use for items that lay fl at or hang to dry.
3. Temp Selection Button
To select the correct temperature for the load, press the Temp button. An indicator light will
illuminate next to the desired temperature. Press the button repeatedly to scroll through the
settings.
Kljk
– For sturdy cottons or those labeled Tumble Dry.
Phglxp
– For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium.
Phglxp#Orz
– For lower heat than Medium to dry synthetic or washable knit fabrics.
Orz#
– For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
H{wud#Orz
– Provides the lowest heated dry temperature possible.
4. Time Selection Button
When using Manual Dry cycles, time can be adjusted by pressing time selection button.
During the Sensory Dry cycle, the time light indicator is off because exact drying times are
determined by fl uctuating humidity levels.
6041#RYHUYLHZ#RI#WKH#FRQWURO#SDQHO