Samsung DMR78AHS/XAC Page 32 Service Manual Download

Page: 32 / 106

3-18

3. Disassembly and Reassembly

Part

Photo

Description

Case Sensor

1. Remove the (2) screws of the L frame.

2. Remove the L frame.

Caution

Make sure to wear gloves when removing the L

frame. Be careful as the steel plate may harm you.

3. Remove the drain hose from the bracket hose drain.

Hold the drain hose using both hands and move it

up and pull it out.

4. Use your hand to hold the case brake and rotate

the cover brake. Use a jig to remove by rotating the

cover brake. If you have no jig, you can use a pair of

long nose pliers.

It can be separated into a gasket brake, cover brake

and case brake.

5. Remove the case sensor assy from the case brake

assy.

Be careful to avoid breaking them, because they are

connected with a hook.

Summary of Contents for DMR78AHS/XAC











































































































Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands

Samsung DMR78AHS/XAC, Service Manual

Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands