Samsung DMR78AHS/XAC Page 31 Service Manual Download

Page: 31 / 106

3-17

3. Disassembly and Reassembly

Part

Photo

Description

Fan Motor

4. Remove the cover fan by rotating it

counterclockwise.

Use a jig. If you have no jig, use a tool such as a

pair of long nose pliers. Remove it carefully so that

the part is not damaged.

5. Remove the two (2) screws holding the cover fan in

place.

6. Hold and remove both the case vent assy and the

duct condenser assy together which are located at

the front of the tub front.

Caution

Be careful while removing them as the duct

condenser assy is touching the bracket door link and

the cushion duct L/R.

7. Remove the fan motor from the case vent assy.

It is connected with two (2) screws and the fan vent

is inserted into the shaft of the fan motor. Remove

the screws first and carefully pull out the fan motor.

8. Remove the duct condenser from the case vent

assy. Remove the three (3) screws.

9. Remove the case vent assy, fan motor, fan vent,

duct condenser, and seal vent.

Summary of Contents for DMR78AHS/XAC











































































































Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands

Samsung DMR78AHS/XAC, Service Manual

Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands