Samsung DMR78AHS/XAC Page 29 Service Manual Download

Page: 29 / 106

3-15

3. Disassembly and Reassembly

Part

Photo

Description

Dispenser

1. Open the door completely.

Remove the twelve (12) screws holding the tub front,

fame front, and panel front in place.

Caution

Before removing the screws, place a cushioned mat

on the floor to prevent the handle and frame front

from being scratched. After removing them, make

sure to hold the tub front with your hand while you

are working as the tub may close and harm you.

Caution

Do not place the removed screws on the tub front.

They may fall into the sump assy.

2. Remove the fan motor connector.

3. Remove the four (4) connectors on both sides of the

Dispenser.

Caution

The connectors are of the locking type and are

hard to remove. Be careful not to break them when

removing them.

4. Remove the six (6) screws holding the tub front and

the two (2) racket dispensers in place.

5. The dispenser is fixed to the tub front with a hook.

Use a flat screwdriver to remove it from the tub front.

Caution

Be careful as the tub front is sharp.

Summary of Contents for DMR78AHS/XAC











































































































Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands

Samsung DMR78AHS/XAC, Service Manual

Search results

Summary of Contents for DMR78AHS/XAC

Reviews:

Related manuals for DMR78AHS/XAC

Brands by name

Popular brands